-10%
IOT-Audios LM3886 Stereo High Power Amplifier Board
Original price was: ₹5,999.00.₹3,299.00Current price is: ₹3,299.00.
F405 Wing App Flight Controller 168MHz for FPV Drone RC Airplane Quadcopters|Toys & Hobbies | Radio Control & Control Line | RC Model Vehicle Parts & Accs | Other RC Parts & Accs
Original price was: ₹9,999.00.₹8,999.00Current price is: ₹8,999.00.
PIXHAWK Flight Controller 2.4.8 32 Bit with Power Module, Safety Switch, Buzzer, 4G SD Card, FC for Plane/3-8 Copter/VTOL/Car/Boat/Robot/Mower
Original price was: ₹9,999.00.₹8,999.00Current price is: ₹8,999.00.
- Excellent Performance–New layout and technical upgrade base on 3DR PIX. A powerful hardware device can create, you can implement more functions as you want by simple programming.
- High-end Configuration–Advanced 32F427 ARM Cortex M4 Core high-performance processor, 32bit fail-safe co-processor, MPU 6000 3-axis accelerometer.
- Easier Setting–No complicated setup for beginner and expert pilots, easy to operative calibration settings on Mission Planner(Normally setting same as the APM PIXHAWK, flash firmware please download Radiolink’s Mission Planner)
- Stabilization–Producing by automatic and unique automation software testing, it achieved interference less from inner components, built-in barometer sensor to make altitude hold stabilization.
- Multiple Function–Support OSD and GPS module and more, suit for long-wheelbase quadcopter and 6-8 axis multirotor.
Description
Reviews (0)
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DIY Quadcopter Drone Kit, Complete Set with Motors, ESC, Propellers, Flight Controller, Frame and TX-RX, Red & White
About this item
- COMPLETE KIT: Comprehensive DIY quadcopter drone kit includes brushless motors, ESCs, propellers, flight controller with LCD display, frame, and transmitter-receiver set for custom build
- ADVANCED CONTROLS: Professional flight controller board features pre-soldered headers, integrated sensors, and programmable settings for stable flight performance
- POWERFUL MOTORS: Set of 4 high-performance brushless motors with gold-anodised casings paired with matching ESCs for reliable power delivery and precise control
- DURABLE FRAME: Red and white quadcopter frame construction provides structural stability while maintaining optimal weight distribution for flight
- TECHNICAL SPECS: Frame dimensions 30 x 30 x 10 cm, 180mAh battery compatibility, 50g battery weight capacity, suitable for intermediate skill level builders
HGLRC-VEYRON 35 CR PUSHER CINEWHOOP FRAME KIT
VEYRON 35 CR PUSHER CINEWHOOP FRAME KIT
HGLRC Veyron35CR 3.5″ Pusher Cinewhoop Frame Kit – Lightweight Powerhouse for Pro-Level Aerial Cinematography
The Veyron35CR 3.5″ Pusher Cinewhoop Frame Kit from HGLRC is an advanced and compact drone frame designed specifically for cinematic FPV pilots who demand top-tier performance in a small, agile platform. Engineered with a pusher-style layout, this frame shifts the propellers below the body, lowering the center of gravity for smoother, more stable flight — perfect for capturing silky-smooth aerial footage in tight spaces.
This 3.5-inch frame is optimized to comfortably carry a full-size GoPro camera, making it an excellent choice for pilots looking to elevate their video quality without committing to a larger, heavier build. Despite its compact dimensions, the Veyron35CR delivers robust structural integrity and flight performance, making it suitable for both indoor and outdoor cinematic flying.
A standout feature of the Veyron35CR is its integrated EVA foam protection guards, which not only shield the propellers and surroundings but also enhance flight stability by reducing vibrations. Available in three vibrant color options — gray, white, and yellow — these foam bumpers add a layer of style while improving safety and frame durability during collisions or rough landings. This makes the frame especially valuable for flying in complex environments like urban settings, forests, or indoor venues.
Designed with both enthusiasts and professionals in mind, the Veyron35CR frame features lightweight, high-quality materials, ensuring optimal efficiency without compromising strength. Its modular build supports easy assembly and customization, allowing pilots to configure the drone according to their specific needs, whether that’s for freestyle, cinematic flying, or dynamic chase shots.
If you’re looking for a reliable, stylish, and high-performance cinewhoop frame capable of carrying high-end cameras, the HGLRC Veyron35CR 3.5″ Pusher Cinewhoop Frame Kit is an excellent foundation to build your next aerial rig. Shop now at
IMAX B3 AC Pro Compact Balance Charger for 2S-3S LiPo
- This is B3AC Pro - LiPo Battery Charger
- Compact and powerful 2/3 cell LiPo charger
- Built-in JST-XH balance plug ports
- High-precision balance circuit can supply a large current of up to 800mA per cell
- Dual-colour LEDs indicate charge status on each cell (RED: charging; GREEN: full)
- 100-240V AC input
- Separate balance ports for 2 and 3 cell batteries
- Lightweight and portable design suitable for charging drone and other RC batteries in 2S or 3S configuration.
Indian rc hobby HGLRC Veyron25CR 2.5 Inches Cinewhoop Indoor FPV Frame Fpv drone frame
Feature: *Supports (20x20-25.5x25.5) mounting holes *Supports both AIO/stack installing at the same time.Epuipped with 1404 Aeolus motors, ultra-light weight and have a super long flight time. *Using mold EVA protecting ducts,super durable. Brand:HGLRC Model:Veyron25CR Cinewhoop Frame Material:3K carbon fiber Type:2.5 inches Frame Wheelbase:120mm Size:187*164mm Top plate:1.5mm Bottom plate:2mm Space:25mm Flight control mounting hole:20x20mm/25.5x25.5mm Support camera:19*19mm Weight:82g Motor mounting holes:∅9-12 Shipping list: 1x 1.5mm top plate 1x 2mm bottom plate 2x Mold Ducts 4x protection half EVA Foam 1x 4P cable 1x Type C female 1x Type C male 1x Micro male 1x round head screw M5*20 4x round head screws M3*25 1x round head screw M3*20 4x round head screws M2*20 8x cup head screws M2*7 14x round head screws M2*6 2x round head screws M2*4 4x Round head screw M2*5 2x M2*8 Nylon columns 1x M5 self-locking nut 5x M3 self-locking nuts 4x M2 self-locking nuts 4x M3*8 shock absorbing balls 4x M2*4 shock absorption columns 2x battery straps 15x200mm 1x battery non-slip pad 1x TPU GoPro fixing mount 1x TPU naked GoPro fixing mount 1x TPU antenna base 1x TPU black LED fixing mount 1x TPU black landing protector Recommended parts:(not included) Flight control:Zeus25/F722 MINI Motor:14XX/16XX/18XX ESC:Zeus25A-40A Camera:19X19mm Propeller:2.5 inches Battery:4S 450mAh 650mAh
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe
Model: F4 NOXE V3
Main control (MCU): STM32F411CEU6/100 MHz
Sensor: ICM-42688-P/Gyro/Accel
Video Overlay (OSD): AT7456E
Barometer (Baro): Yes
Black Box (Black Box): 16MB
Input voltage: 2S-6S (7.4V-26V)
5V-BEC: 5V/2.5A ± 0.1V
10V-BEC: 10V/2A+0.1V
Receivers (receivers): ELRs (CRSF), TBS (CRSF), SBUS, IBUS, DSM, DSMX
HD interface: yes
UART: UART 1, UART 2
LIC: IIC1
LED strip: yes
Buzzer (buzzer): support 5V active
ESC signal (ESC signal): PWM, Oneshot125, Oneshot42, Multishot,DSHOT150, DSHOT 300, DSHOT 600
USB: Micro USB
Current terminal] (current port): yes
Voltage sensor (voltage sensor): Yes
Dfu button (dfu button): Yes
Firmware (Firmware): Betaflight_4.3.1 JHEF 411.HEX
Size: 27*27*5 mm
Mounting hole: 20*20*3 mm
Weight (weight): 4.3g
L293D Motor Driver/Servo Shield for Arduino
-
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
-
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
-
- Can run motors on 4.5VDC to 25VDC.
-
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Refurbished DJI NAZA M V2 Flight Controller Multi Rotor System with COMPASS GPS
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.
The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe. CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the OSD Module, or a gimbal control unit (GCU).
Features Description:
Package Includes :
(package may not come with Yellow box packing as shown in the photo but Product is 100% original and in new condition)
- DJI NAZA-V2 All in One Design
- DJI adheres to continuously innovating and improving, with the new latest firmware, new attitude stabilization, and Improved hardware structure, the Naza-M V2 provides the best flight performance. This All-in-one design simplifies installation and saves space and weight of the drone. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer, and barometer in its light and small Main Controller for the batter performance. It can also measure flying altitude, attitude, and distance from the origin and therefore can be used for autopilot/automatic control.
- Types of Multirotor Configuration Supported
- Quad +
- Quad X
- HEX I
- HEX V
- HEX IY
- HEX Y
- OCT X
- OCT I
- OCT V
- Free Ground Station Support
- 16-point Ground Station is available free for both iPad and PC, without serial number verification. 2.4G Bluetooth Datalink required.
- Advance Attitude Stabilization Algorithm
- The Naza-M V2 boasts the extraordinary stability you would expect of all DJI flight control systems and combines it with unparalleled maneuverability with and without GPS. Built into it are automatic GPS course correction plus GPS and compass interference monitoring, which combine to offer more stable flight and minimal magnetic interference.
- Takeoff Assistance
- Drift-free, stable take-offs on different surfaces are ensured with Takeoff Assistance.
- Intelligent Orientation Control (IOC)
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- In Course Lock mode, forward is the same as the nose direction recorded on takeoff.
- In-Home Lock mode forward is the direction from the multirotor’s current position back to home.
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- Motor Failure Protection
- If a hex-rotor or octocopter equipped with a Naza-M V2 suffers a motor failure in flight in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. This allows it to fly safely back to home and land.
- Failsafe and Auto Go Home Support
- If the connection between the multirotor and the remote control is disconnected during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multirotor will fly back to its point of takeoff and land automatically. This feature can also be triggered manually using the One-Key Go-Home function activated using Assistant.
- Assistance for Smartphone
- Using a BTU with power-efficient Bluetooth, parameters can be adjusted at any time through a smartphone without excessive power use. Connection records are automatically stored by the Bluetooth module and protected by a password. Parameters can be automatically synchronized to the cloud and restored immediately when mobile devices are changed.
- All-In-One Compact Multi-Rotor Autopilot System
- New Assistant Software for Smartphones
- Supported Multi-rotors Quad-rotor: I4, X4
- Hex-rotor: I6, X6, IY6, Y6
- Octo-rotor I8, V8, X8
- Free Ground Station
- Take-Off Assistance
- Multiple Flight Control Modes and Intelligent Switching
- GPS Module Available for Accurate Position Stabilization
- Intelligent Orientation Control (IOC)
- Supports General, PPM, and S-Bus Receivers
- Arm/Disarm Modes for Safe Motor Starting
- 2-Axis Gimbal Stabilization
- Two Levels of Low Voltage Warnings and Protection
- Single Motor Failure Protection
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Supports Remote Gain Adjustment from the Transmitter
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems
- Assistant Software Windows: 8, 7, XP SP3
- OS X: 10.6 or later
- Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
- Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
- Horizontal: ±8.2′ / ±2.5 m
- Max Angular Speed 200°/s
- Max Tilt Angle 35°
- Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
- Descent: 14.8 ft/s / 4.5 m/s
|
Product |
Target Customer |
Hardware |
Software |
Function Extension Ability |
Major Components |
|---|---|---|---|---|---|
| NAZA-M Lite | AP/RC entry level | Based on NAZA V1 platform; no extension ability | NAZA lite Independent assistant software and firmware; | 1.GPS (Optional) 2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD) | MC GPS（optional） BEC/LED（Will have independent BEC and LED in the future） |
| NAZA-M V1 | AP/RC hobbyist | Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function; | Share the same NAZAM V2 assistant software and firmware; | 1.GPS (Optional) 2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS（optional） BEC/LED |
| NAZA-M V2+GPS Combo | AP/RC hobbyist | Optimized hardware structure; Independent PMU module with amazing function extension ability; Independent LED module; | Amazing function extension：such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS NAZAPMU V2 LED |
- 1 x Main Controller Unit.
- 8 x Servo cable.
- 1 x Power Management unit.
- 1 x Micro USB Cable.
- 1 x LED Module.
- 2 x Adhesive Tape.
- 1 x GPS Module.
Reviews
There are no reviews yet.