-10%
PIXHAWK Flight Controller 2.4.8 32 Bit with Power Module, Safety Switch, Buzzer, 4G SD Card, FC for Plane/3-8 Copter/VTOL/Car/Boat/Robot/Mower
Original price was: ₹9,999.00.₹8,999.00Current price is: ₹8,999.00.
Neo-6m GPS Module Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5
Original price was: ₹799.00.₹550.00Current price is: ₹550.00.
F405 Wing App Flight Controller 168MHz for FPV Drone RC Airplane Quadcopters|Toys & Hobbies | Radio Control & Control Line | RC Model Vehicle Parts & Accs | Other RC Parts & Accs
Original price was: ₹9,999.00.₹8,999.00Current price is: ₹8,999.00.
Product description
Description:
【Flight Controller】: F405 Wing APP Flight Controller, supports wireless configuration via Apps, no more tedious drivers or data cables, easy and convenient configuration.
【Wide Applications】: Professional flight Controller is designed specially for fixed wing drones, FPV drones, RC airplanes, etc.
【MCU】: STM32F405, 168MHz , 1MB Flash, IMU: ICM42688-P, Baro: SPL06-001, OSD: AT7456E, : MicroSD card slot.
【Multi Interfaces】: The F405 Flight Controller has 6x UARTs, 12x PWM,1x I2C, Plug and play, .
【PDB Board】: Flight Controller, Input Voltage Range: 7~36V (2-6S Lipo ), with TVS protection, Scale 195 in INAV, 50 A/V in
Specification:
Product size: 3.2cmx5.2cmx1.9cm/1.26inchx2.05inchx0.75inch
Material: electronic components, poly
Package Includes:
1 Flight Controller
Note:
Please allow slightly errors due to manual measurement and different monitors.
Description
Reviews (0)
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DIY Quadcopter Drone Kit, Complete Set with Motors, ESC, Propellers, Flight Controller, Frame and TX-RX, Red & White
About this item
- COMPLETE KIT: Comprehensive DIY quadcopter drone kit includes brushless motors, ESCs, propellers, flight controller with LCD display, frame, and transmitter-receiver set for custom build
- ADVANCED CONTROLS: Professional flight controller board features pre-soldered headers, integrated sensors, and programmable settings for stable flight performance
- POWERFUL MOTORS: Set of 4 high-performance brushless motors with gold-anodised casings paired with matching ESCs for reliable power delivery and precise control
- DURABLE FRAME: Red and white quadcopter frame construction provides structural stability while maintaining optimal weight distribution for flight
- TECHNICAL SPECS: Frame dimensions 30 x 30 x 10 cm, 180mAh battery compatibility, 50g battery weight capacity, suitable for intermediate skill level builders
HGLRC Zeus Nano 350mW 16mm/20mm/25.5mm VTX
HGLRC Zeus Nano 350mW 16mm/20mm/25.5mm VTX
The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns… including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of application.Specifications of HGLRC Zeus Nano 350mW VTX
- Built-in Microphone
- Input voltage:DC 5V
- PIT@75mA
- 25mW@180mA/16dBm
- 100mW@280mA/21.5dBm
- 200mW@330mA/24.5dBm
- 350mW@400mA/27.5dBm
- Antenna interface:ipex
- Output power:PIT/25/100/200/350mW
- Standard 40 channels. A/B/E/F/R frequency group
- Installing Hole:16X16/25.5X25.5mm.M2
- 20X20mm.M3
- Size:18.6mm x 13.6mm x 6mm
- Weight:2.4g
IMAX B3 AC Pro Compact Balance Charger for 2S-3S LiPo
- This is B3AC Pro - LiPo Battery Charger
- Compact and powerful 2/3 cell LiPo charger
- Built-in JST-XH balance plug ports
- High-precision balance circuit can supply a large current of up to 800mA per cell
- Dual-colour LEDs indicate charge status on each cell (RED: charging; GREEN: full)
- 100-240V AC input
- Separate balance ports for 2 and 3 cell batteries
- Lightweight and portable design suitable for charging drone and other RC batteries in 2S or 3S configuration.
LiPo Battery 11.1V 2200MAH 3S 80C
11.1V 2200mAH Lipo battery is Capable of maximum continuous discharge rates up to 80C, placing this battery among the most powerful Li-Po battery packs in its class! It offers an excellent blend of weight, power, and performance.
Features:
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
- Capacity (mAh) : 2200
- Weight (gm) : 175
- Output Voltage : 11.1 V
- Charge Rate : 1-3 C (Recommended)
- Discharge Plug : XT-60
- Balance Plug : JST-XH
- Length (mm) : 106
- Width (mm) : 34
- Height (mm) : 23
- Max. Charge Rate : 5 C
- Max. Continuous
- Discharge : 80C(55.0A)
- Avoid over-charging or over-discharging the batteries.
- Do not put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX (FSI6))
This RC Aeroplane Kit includes almost all parts for the basic RC Aeroplane with 6ch RX TX. It includes everything to make and fly your own RC Aeroplane. This Kit Provides a FlySky FS-i6 RC Transmitter with Receiver,1000kv Brushless motor,30A Simonk ESC, TowerPro SG90 Servo Motor, and a 1045 Propeller pair(CW+CCW).
FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter with FS-iA6 Receiver is a great low-cost entry-level 6-channel 2.4 GHz Transmitter and Receiver that uses solid and reliable Automatic Frequency Hopping Digital System spread spectrum technology. It also comes with an FS-iA6 6-channel receiver. Suitable for controlling Quadcopters, Multirotor, Heli, and Airplane.
1000KV Brushless DC Motor is a brushless motor specifically made for RC planes, quadcopters, and multi-rotors. It is a 1000kV motor. It provides high performance, superpower, and brilliant efficiency.
30A Simonk ESC Electronic Speed Controller can drive motors that consume up to 30A current. It can be used to control our brushless motors with a 2S-3S LiPo. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.
TowerPro SG90 Servo Motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all radio control systems. It is with excellent performance and high torque of 1.5 kg-cm gives you the freedom to use it for a variety of projects.
The 10x4.5 inch Propeller Pair (CW+CCW) is a set of counter-rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters. The length is 10 inches and the pitch is 4.5 inches per revolution.
Refurbished DJI NAZA M V2 Flight Controller Multi Rotor System with COMPASS GPS
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.
The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe. CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the OSD Module, or a gimbal control unit (GCU).
Features Description:
Package Includes :
(package may not come with Yellow box packing as shown in the photo but Product is 100% original and in new condition)
- DJI NAZA-V2 All in One Design
- DJI adheres to continuously innovating and improving, with the new latest firmware, new attitude stabilization, and Improved hardware structure, the Naza-M V2 provides the best flight performance. This All-in-one design simplifies installation and saves space and weight of the drone. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer, and barometer in its light and small Main Controller for the batter performance. It can also measure flying altitude, attitude, and distance from the origin and therefore can be used for autopilot/automatic control.
- Types of Multirotor Configuration Supported
- Quad +
- Quad X
- HEX I
- HEX V
- HEX IY
- HEX Y
- OCT X
- OCT I
- OCT V
- Free Ground Station Support
- 16-point Ground Station is available free for both iPad and PC, without serial number verification. 2.4G Bluetooth Datalink required.
- Advance Attitude Stabilization Algorithm
- The Naza-M V2 boasts the extraordinary stability you would expect of all DJI flight control systems and combines it with unparalleled maneuverability with and without GPS. Built into it are automatic GPS course correction plus GPS and compass interference monitoring, which combine to offer more stable flight and minimal magnetic interference.
- Takeoff Assistance
- Drift-free, stable take-offs on different surfaces are ensured with Takeoff Assistance.
- Intelligent Orientation Control (IOC)
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- In Course Lock mode, forward is the same as the nose direction recorded on takeoff.
- In-Home Lock mode forward is the direction from the multirotor’s current position back to home.
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- Motor Failure Protection
- If a hex-rotor or octocopter equipped with a Naza-M V2 suffers a motor failure in flight in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. This allows it to fly safely back to home and land.
- Failsafe and Auto Go Home Support
- If the connection between the multirotor and the remote control is disconnected during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multirotor will fly back to its point of takeoff and land automatically. This feature can also be triggered manually using the One-Key Go-Home function activated using Assistant.
- Assistance for Smartphone
- Using a BTU with power-efficient Bluetooth, parameters can be adjusted at any time through a smartphone without excessive power use. Connection records are automatically stored by the Bluetooth module and protected by a password. Parameters can be automatically synchronized to the cloud and restored immediately when mobile devices are changed.
- All-In-One Compact Multi-Rotor Autopilot System
- New Assistant Software for Smartphones
- Supported Multi-rotors Quad-rotor: I4, X4
- Hex-rotor: I6, X6, IY6, Y6
- Octo-rotor I8, V8, X8
- Free Ground Station
- Take-Off Assistance
- Multiple Flight Control Modes and Intelligent Switching
- GPS Module Available for Accurate Position Stabilization
- Intelligent Orientation Control (IOC)
- Supports General, PPM, and S-Bus Receivers
- Arm/Disarm Modes for Safe Motor Starting
- 2-Axis Gimbal Stabilization
- Two Levels of Low Voltage Warnings and Protection
- Single Motor Failure Protection
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Supports Remote Gain Adjustment from the Transmitter
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems
- Assistant Software Windows: 8, 7, XP SP3
- OS X: 10.6 or later
- Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
- Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
- Horizontal: ±8.2′ / ±2.5 m
- Max Angular Speed 200°/s
- Max Tilt Angle 35°
- Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
- Descent: 14.8 ft/s / 4.5 m/s
|
Product |
Target Customer |
Hardware |
Software |
Function Extension Ability |
Major Components |
|---|---|---|---|---|---|
| NAZA-M Lite | AP/RC entry level | Based on NAZA V1 platform; no extension ability | NAZA lite Independent assistant software and firmware; | 1.GPS (Optional) 2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD) | MC GPS（optional） BEC/LED（Will have independent BEC and LED in the future） |
| NAZA-M V1 | AP/RC hobbyist | Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function; | Share the same NAZAM V2 assistant software and firmware; | 1.GPS (Optional) 2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS（optional） BEC/LED |
| NAZA-M V2+GPS Combo | AP/RC hobbyist | Optimized hardware structure; Independent PMU module with amazing function extension ability; Independent LED module; | Amazing function extension：such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS NAZAPMU V2 LED |
- 1 x Main Controller Unit.
- 8 x Servo cable.
- 1 x Power Management unit.
- 1 x Micro USB Cable.
- 1 x LED Module.
- 2 x Adhesive Tape.
- 1 x GPS Module.
Reviews
There are no reviews yet.