Shop
Pagaria Multifunction Usb Card Bass Treble Mic Echo With Encoder Support
Pagaria Music Player Audio Decoder Module with Frame + Display
Description
Pagaria Music Player Audio Decoder Module
The Pagaria Music Player Module is a compact and versatile audio decoding board designed for DIY audio systems, speaker builds, and electronics projects. This module allows users to play music directly from multiple sources such as Bluetooth-enabled devices, TF/SD cards, AUX input, and FM radio, making it a complete audio playback solution in a small form factor.
Equipped with a clear digital display and onboard control buttons, the Pagaria music player module enables easy navigation between playback modes, tracks, and audio settings. The module is widely used by electronics hobbyists, makers, and audio enthusiasts who want to build custom Bluetooth speakers, portable music systems, or home audio projects.
With its stable decoding capability and compact PCB design, the Pagaria module integrates easily with amplifier boards and speaker systems to deliver reliable sound output. It is an excellent solution for upgrading traditional audio systems into modern multimedia music players.
Note: PCB layout, connector position, and component placement may vary depending on production batch.
Key Features
-
Multi-Source Music Playback – Supports Bluetooth, FM radio, AUX input, and TF/SD card playback.
-
Digital Display Interface – Shows playback status, track information, and mode selection.
-
Compact Audio Module – Small PCB design ideal for DIY electronics and embedded audio systems.
-
Easy Integration – Connects easily with amplifiers and speaker modules.
-
Stable Audio Decoding – Provides smooth and reliable music playback.
-
User-Friendly Controls – Onboard buttons for playback, volume, and mode selection.
-
Versatile DIY Solution – Perfect for custom speaker builds and audio electronics projects.
PIXHAWK Flight Controller 2.4.8 32 Bit with Power Module, Safety Switch, Buzzer, 4G SD Card, FC for Plane/3-8 Copter/VTOL/Car/Boat/Robot/Mower
- Excellent Performance--New layout and technical upgrade base on 3DR PIX. A powerful hardware device can create, you can implement more functions as you want by simple programming.
- High-end Configuration--Advanced 32F427 ARM Cortex M4 Core high-performance processor, 32bit fail-safe co-processor, MPU 6000 3-axis accelerometer.
- Easier Setting--No complicated setup for beginner and expert pilots, easy to operative calibration settings on Mission Planner(Normally setting same as the APM PIXHAWK, flash firmware please download Radiolink's Mission Planner)
- Stabilization--Producing by automatic and unique automation software testing, it achieved interference less from inner components, built-in barometer sensor to make altitude hold stabilization.
- Multiple Function--Support OSD and GPS module and more, suit for long-wheelbase quadcopter and 6-8 axis multirotor.
Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
This quadcopter combo kit includes almost all parts for the basisc quadcopter drone, It includes everything to make and fly your own quadcopter. The flight controller comes with this drone is Pixhawk 2.4.8.
(Download Mission Planner HERE)
RadioLink AT10II 2.4GHz 12CH FPV Transmitter DSSS/FHSS Hybrid Spread Spectrum UAV/Plane Ardupilot/Pix4 Supported 4km Range
Key attributes
brand name
RadioLink
private mold
Yes
place of origin
Guangdong, China
Dimension
180*95*220mm (7.1"* 3.7"* 8.7")
Weight
0.95kg(2.1 lb)
Application
Agricultural and Industrial Drones
Operating Voltage
7.4~15.0V
Frequency
2.4GHz ISM band
Spread Spectrum
DSSS&FHSS
Signals Output
PPM/SBUS&PWM
Channel Quantity
12 channels, all 12 channels can be customized
Control distance
4000 meters(2.49Miles) in the air
Packaging and delivery
Selling Units
Single item
Single package size
39X30X15 cm
Refurbished DJI NAZA M V2 Flight Controller Multi Rotor System with COMPASS GPS
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.
The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe. CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the OSD Module, or a gimbal control unit (GCU).
Features Description:
Package Includes :
(package may not come with Yellow box packing as shown in the photo but Product is 100% original and in new condition)
- DJI NAZA-V2 All in One Design
- DJI adheres to continuously innovating and improving, with the new latest firmware, new attitude stabilization, and Improved hardware structure, the Naza-M V2 provides the best flight performance. This All-in-one design simplifies installation and saves space and weight of the drone. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer, and barometer in its light and small Main Controller for the batter performance. It can also measure flying altitude, attitude, and distance from the origin and therefore can be used for autopilot/automatic control.
- Types of Multirotor Configuration Supported
- Quad +
- Quad X
- HEX I
- HEX V
- HEX IY
- HEX Y
- OCT X
- OCT I
- OCT V
- Free Ground Station Support
- 16-point Ground Station is available free for both iPad and PC, without serial number verification. 2.4G Bluetooth Datalink required.
- Advance Attitude Stabilization Algorithm
- The Naza-M V2 boasts the extraordinary stability you would expect of all DJI flight control systems and combines it with unparalleled maneuverability with and without GPS. Built into it are automatic GPS course correction plus GPS and compass interference monitoring, which combine to offer more stable flight and minimal magnetic interference.
- Takeoff Assistance
- Drift-free, stable take-offs on different surfaces are ensured with Takeoff Assistance.
- Intelligent Orientation Control (IOC)
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- In Course Lock mode, forward is the same as the nose direction recorded on takeoff.
- In-Home Lock mode forward is the direction from the multirotor’s current position back to home.
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- Motor Failure Protection
- If a hex-rotor or octocopter equipped with a Naza-M V2 suffers a motor failure in flight in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. This allows it to fly safely back to home and land.
- Failsafe and Auto Go Home Support
- If the connection between the multirotor and the remote control is disconnected during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multirotor will fly back to its point of takeoff and land automatically. This feature can also be triggered manually using the One-Key Go-Home function activated using Assistant.
- Assistance for Smartphone
- Using a BTU with power-efficient Bluetooth, parameters can be adjusted at any time through a smartphone without excessive power use. Connection records are automatically stored by the Bluetooth module and protected by a password. Parameters can be automatically synchronized to the cloud and restored immediately when mobile devices are changed.
- All-In-One Compact Multi-Rotor Autopilot System
- New Assistant Software for Smartphones
- Supported Multi-rotors Quad-rotor: I4, X4
- Hex-rotor: I6, X6, IY6, Y6
- Octo-rotor I8, V8, X8
- Free Ground Station
- Take-Off Assistance
- Multiple Flight Control Modes and Intelligent Switching
- GPS Module Available for Accurate Position Stabilization
- Intelligent Orientation Control (IOC)
- Supports General, PPM, and S-Bus Receivers
- Arm/Disarm Modes for Safe Motor Starting
- 2-Axis Gimbal Stabilization
- Two Levels of Low Voltage Warnings and Protection
- Single Motor Failure Protection
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Supports Remote Gain Adjustment from the Transmitter
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems
- Assistant Software Windows: 8, 7, XP SP3
- OS X: 10.6 or later
- Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
- Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
- Horizontal: ±8.2′ / ±2.5 m
- Max Angular Speed 200°/s
- Max Tilt Angle 35°
- Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
- Descent: 14.8 ft/s / 4.5 m/s
|
Product |
Target Customer |
Hardware |
Software |
Function Extension Ability |
Major Components |
|---|---|---|---|---|---|
| NAZA-M Lite | AP/RC entry level | Based on NAZA V1 platform; no extension ability | NAZA lite Independent assistant software and firmware; | 1.GPS (Optional) 2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD) | MC GPS（optional） BEC/LED（Will have independent BEC and LED in the future） |
| NAZA-M V1 | AP/RC hobbyist | Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function; | Share the same NAZAM V2 assistant software and firmware; | 1.GPS (Optional) 2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS（optional） BEC/LED |
| NAZA-M V2+GPS Combo | AP/RC hobbyist | Optimized hardware structure; Independent PMU module with amazing function extension ability; Independent LED module; | Amazing function extension：such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS NAZAPMU V2 LED |
- 1 x Main Controller Unit.
- 8 x Servo cable.
- 1 x Power Management unit.
- 1 x Micro USB Cable.
- 1 x LED Module.
- 2 x Adhesive Tape.
- 1 x GPS Module.
Smart Lock Fingerprint Biometric Padlock | Keyless&Password-Free Access | Stores 20 Fingerprint | Waterproof Metal Lock for Home,Office Security
- CBK Smart Lock Fingerprint Biometric Padlock Package contains: 1 pis- Smart Lock , 1-Pis USB Charging Cable , CBK Smart Lock include And Does Not Require Any Type of Other Betery.
- Keyless Fingerprint Access: No Bluetooth, app, or key needed! Because your finger serves as the key, this fingerprint padlock is perfect for both young people and senior citizens. It can only be unlocked with registered fingerprints, saving you the trouble of misplaced keys or forgotten passwords. Note: For optimal security, set the administrator's fingerprint before using.
- Rechargeable and Fast Unlocking: With its cutting-edge fingerprint technology, it unlocks in 0.5 seconds! For easy entry, this smart lock may store up to ten fingerprints, including those of two administrators. Over 9,000 unlocks or 6–12 months of use are possible with a full one-hour recharge
- Versatile Uses: This fingerprint padlock is lightweight and portable, making it excellent for both indoor and outdoor applications. It may be used on gym lockers, suitcases, golf bags, handbags, school lockers, closets, bicycles, and more. Maintain the safety and accessibility of your possessions at all times and locations! Energy-Efficient Design: The low power consumption of this secure fingerprint padlock ensures that it runs well without rapidly depleting the battery. Perfect for regular use without the need for frequent charging.
- Battery-Saving Technology: This fingerprint padlock is a reliable option for home, business, and travel protection because it uses minimal energy while maintaining good performance
Stylus Pen Android for Samsung Galaxy Tab A9/A9Plus/A8/A8plus/A7/A7lite Tablet S Pencil Touchscreens Stylists Pen (White)
- Compatible with：Android, iOS, and Windows
- Precise and sensitive: Stylus Pen has premium 1.5 mm nib, sensitive touch technology provides better accuracy and compatibility without delays and disconnections, allowing you to create with maximum precision at all times.There is magnetic suction
- Convenient and easy: No apps to install.Just double-click the pen cap to let you easily enjoy smooth writing or drawing, create anything without limitation
- Efficient and durable: The product comes with a USB charging port and a built-in battery that allows you to use it for 10 hours after only 0.5 hour of charging
- packing:which can extend the life of the stylus， 1 stylus, 2 replacement nib, 1 Type C charging cable, and 1 user manua
- 4 Indicator Lights for battery life Display：Just take a glance and you can easily measure the battery life of your pencil, ensuring you are always ready to create
- 【Notice】What if the stylus pen doesn't work on the tab?Please disconnect your tab from the Pencil first
SX21 Portable Wireless Lavalier Microphone for Vlog Live Audio and Vlog Video Recording Compatible with Multiple Devices
TDA-2050 5.1 AMPLIFIER WITH REMOTE, ENCODER & DISPLAY
2.0 & 4.0 Amplifier 2.0 Class AB Amplifier Board 2.0 Class D Amplifier Board 2.1 & 4.1 Class AB Amplifier Board Audio Pannel Usb Module & Bluetooth Subwoofer Amplifier
FEATURES & FUNCTIONS
1. FULLY REMOTE CONTROLLED WITH ROTTERY ENCODER
2. ALL FUNCTIONS WILL STORE TO LAST MEMORY
3. 5.1 (ALL 6CH) & 2.1 (ONLY FR & S.W) OPTION ON REMOTE
4. 1- SIX CHANNEL & 4-STEREO INPUTS
5. STEREO TO 5.1 DECODER IS INBUILT
6. BASS TREBLE ON FRONT CHANNELS (+\-14DB)
7. BASS TREBLE CAN BE DESABLE BY REMOTE
8. ALL CHANNELS GAIN (+\-14DB)
9. INBUILT USB 5V POWER SUPPLY
10. INBUILT SUBWOOFER FILTER
11. ANY MARKET USB KIT CAN BE CONTROLLED BY SAME REMOTE
12. HEAVY HEATSINK &GOOD QUALITY COMPONENTS
13. BOARD SIZE 9" X 5"
14. DISPLAY WELLCOME NAME CAN BE CHANGE AS PER CUSTOMER REQUEST
AMPLIFIERS AND POWER SUPPLIES
1. TOTAL SIX CHANNELS
2. SUBWOOFER HAVE TDA-2030 1-PAIR
3. OTHERS 5-CHANNELS HAVE SINGLE TDA-2030
4. SUBWOOFER 60-WATTS
5. FRONT,CENTER & SOURROUND CHANNELS 30-WATTS
6. POWER SUPPLY RECTIFICETION IS INBUILT
7. 12-0-12-AC 4-AMP
8. 0-12 AC 1-AMP