Drones with Camera for Adults 4K, Brushless Motor Drone for Kids Beginners, FPV Foldable RC Code Drone, 45 Mins Long Flight Time, Online Mode Beyond-Range Loss Alert Toys for Kids and Adults.

APM 2.8 Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers. APM 2.8 Board : APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5. The sensors are exactly the same as the APM 2.6 flight controller. This makes the APM 2.8 ideal for use with multi-copters and rovers. The APM 2.8 Multicopter Flight Controller is a complete open-source autopilot system. This is the best-selling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing. In addition, it turns multirotor vehicles (even cars and boats) into fully autonomous vehicles. meanwhile, it is capable of performing programmed GPS missions with waypoints. Shock Absorber : The universal vibration damping mount or shock absorber has a list of useful applications. This is free camera mounting to Flight controller isolation. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment. 7M GPS : Neo 7M GPS module that includes an HMC4883L Digital Compass  The new NEO 7 series is a high sensitivity, low-power GPS module that has 56 channels and outputs precise position updates at 10Hz.  This GPS module also comes with a molded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter. This Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide an excellent GPS signal which outperforms the older Neo 6 series modules.   This Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings.  Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This GPS module includes two cables, a 6pin connector for the GPS module, and a 4 pin connector for the i2c compass. GPS Holder : The GPS Folding Antenna Base mount comes will a laser cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides. APM Power Module : The APM 2.5.2/2.6/2.8 Pixhawk Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from a 2S-6S LiPo battery. The Power Module comes completely assembled with “Deans” or “T” connectors, and wrapped in shrink tubing for protection. Also, the circuit detects a sensing current around 90 A.

Specifications and Features :

APM 2.8 Flight Controller :

1. Needle: straight.
2. Power supply: LP2985-3.3.
3. Max voltage: 16V.
4. Add a 47uF tantalum capacitor.
5. Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
6. Arduino Compatible!
7. Includes 3-axis gyro, accelerometer, along with a high-performance barometer
8. Onboard 4 MegaByte Dataflash chip for automatic data logging.
9. Optional off-board GPS, a uBlox LEA-6H module with Compass.
10. One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
11. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
12. Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

    Glass Fiber Flight Controller Anti-vibration/Shock absorber Set :

    Features:
    1. Color: Black
    2. Material: Glass fiber
    3. Suit for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
    Packaging Details:

    1. Package Weight: 24 gm.
    2. Upper Frame size:  90 x 60 x 2 mm(LxWxH).
    3. Lower Frame Size: 100 x 70 x 2 mm(LxWxH).
    4. Shock absorber Height: 10 x 12 mm.(DxH).

       GPS Folding Base Antenna set :

       1. Material: CNC Aluminum alloy, carbon glass fiber rod
       2. Mounting rod diameter: 4mm
       3. length of rod: 14 cm.
       4. GPS plate diameter: 40 mm.
       5. Base plate diameter: 35 mm
       6. Mounting hole spacing: 16-35mm
       7. Weight: 20g
       8. Colour: Anodised black

       APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0 :

       1. Max input voltage: 28V
       2. Max current sensing: 90A
       3. Voltage and current measurement configured for 5V ADC
       4. Switching regulator outputs 5.3V and 3A max
       5. 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
       6. Support 6S battery

    NEO-7M GPS Module with compass kit :

    1. Locate performance
    2. These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
    3. Super Bright LED
    4. Backplane with Standard Mk style mounting holes 45mm X 45mm
    5. 38400 bps (Default) Changed to 115200bps!
    6. Output GGA, GSA, and RMC frames
    7. 1Hz (Default) Changed to 5Hz!
    8. Permanent Configuration Retention
    9. compass on board
    10. 6 pin connector for EZ connect to MEGA BLACK
    11. 4 pin connector for only GPS use
    12. 4 pin connector for compass only use
    13. Can use both 4 pins at once.

    Package Includes :

    1 x APM 2.8 Flight Controller with 2 connecting wires. 5 x 10CM 30core JR Male to Male servo wire 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set. 1 x NEO-7M GPS Module with compass kit. 1x GPS Folding Base Antenna set. 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.

• ★【Real-time Image Transmission and HD Photography】This small drone is equipped with an HD 1080P camera to capture stunning photos and videos with high quality and frame rate. The camera angle can be adjusted remotely up to 90 degrees. Combined with the upgraded hover system and optical flow positioning technology, the camera drone is more stable when shooting. Wi-Fi real-time transmission enables quickly sharing happy moments with family and friends.
• ★【Highly Stable, Optical Flow Positioning】remote control drone, in contrast to brushed models, boast extended lifespans and lower power consumption. The fan blades can attain higher speeds, and a built-in altitude maintenance system ensures stable hovering at desired heights. Enhanced wind resistance is achieved through optical flow ground detection.
• ★【Total Control at Your Fingertops】camera drone are made for beginners, ensuring extended flight times and equipped with safety features such as One-key Takeoff/Landing, Headless Mode, Altitude Hold and Beyond-Range Loss Alert for a worry-free flying experience. With emergency stop, and 360° flip capabilities, 3 speed modes: high/medium/low, the rc drone opens up a seamless adventure experience.
• ★【Durable Drones for Adventure Seekers】The package, with a sturdy suitcase for outdoor ease, includes 2*1800mAh batteries, offering an impressive 35-40 min flight. Crafted from robust ABS, our drones assure toughness against impacts. Vivid paint, and accessories like a remote controller with an 328ft (100meter) control range, and spare fan blades make it a top-notch gift choice.
• ★【Beyond-Range and Data Loss Alert】Always stay informed about your drone's location, ensuring a safer and more reliable flying experience whether indoors or outdoors. The beyond-range alert (295-328 ft) empowers users with control boundaries, minimizing the risk of losing the drone. However, it is important to note that in high wind conditions, cautious flying (preferably in second or third speed mode) is advised to prevent drone loss.

• ADVANCED FLIGHT CONTROLLER: KK2.1 board features Atmel 644PA processor with integrated LCD display for easy configuration and real-time flight data monitoring
• PRECISION SENSORS: Equipped with MPU6050 6-axis gyroscope and accelerometer for stable flight control and accurate orientation detection in multi-rotor aircraft
• MULTI-ROTOR COMPATIBILITY: Designed specifically for quadcopter, hexacopter, and other multi-rotor unmanned aerial vehicles with versatile configuration options
• LCD DISPLAY INTERFACE: Built-in screen allows direct programming and adjustment of flight parameters without requiring computer connection for convenient field setup
• SELF-LEVELLING CAPABILITY: Integrated sensors enable auto-levelling and stabilisation features to assist pilots in maintaining controlled flight