Shop
Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
This quadcopter combo kit includes almost all parts for the basisc quadcopter drone, It includes everything to make and fly your own quadcopter. The flight controller comes with this drone is Pixhawk 2.4.8.
(Download Mission Planner HERE)
RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX (FSI6))
This RC Aeroplane Kit includes almost all parts for the basic RC Aeroplane with 6ch RX TX. It includes everything to make and fly your own RC Aeroplane. This Kit Provides a FlySky FS-i6 RC Transmitter with Receiver,1000kv Brushless motor,30A Simonk ESC, TowerPro SG90 Servo Motor, and a 1045 Propeller pair(CW+CCW).
FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter with FS-iA6 Receiver is a great low-cost entry-level 6-channel 2.4 GHz Transmitter and Receiver that uses solid and reliable Automatic Frequency Hopping Digital System spread spectrum technology. It also comes with an FS-iA6 6-channel receiver. Suitable for controlling Quadcopters, Multirotor, Heli, and Airplane.
1000KV Brushless DC Motor is a brushless motor specifically made for RC planes, quadcopters, and multi-rotors. It is a 1000kV motor. It provides high performance, superpower, and brilliant efficiency.
30A Simonk ESC Electronic Speed Controller can drive motors that consume up to 30A current. It can be used to control our brushless motors with a 2S-3S LiPo. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.
TowerPro SG90 Servo Motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all radio control systems. It is with excellent performance and high torque of 1.5 kg-cm gives you the freedom to use it for a variety of projects.
The 10x4.5 inch Propeller Pair (CW+CCW) is a set of counter-rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters. The length is 10 inches and the pitch is 4.5 inches per revolution.
Refurbished DJI NAZA M V2 Flight Controller Multi Rotor System with COMPASS GPS
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.
The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe. CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the OSD Module, or a gimbal control unit (GCU).
Features Description:
Package Includes :
(package may not come with Yellow box packing as shown in the photo but Product is 100% original and in new condition)
- DJI NAZA-V2 All in One Design
- DJI adheres to continuously innovating and improving, with the new latest firmware, new attitude stabilization, and Improved hardware structure, the Naza-M V2 provides the best flight performance. This All-in-one design simplifies installation and saves space and weight of the drone. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer, and barometer in its light and small Main Controller for the batter performance. It can also measure flying altitude, attitude, and distance from the origin and therefore can be used for autopilot/automatic control.
- Types of Multirotor Configuration Supported
- Quad +
- Quad X
- HEX I
- HEX V
- HEX IY
- HEX Y
- OCT X
- OCT I
- OCT V
- Free Ground Station Support
- 16-point Ground Station is available free for both iPad and PC, without serial number verification. 2.4G Bluetooth Datalink required.
- Advance Attitude Stabilization Algorithm
- The Naza-M V2 boasts the extraordinary stability you would expect of all DJI flight control systems and combines it with unparalleled maneuverability with and without GPS. Built into it are automatic GPS course correction plus GPS and compass interference monitoring, which combine to offer more stable flight and minimal magnetic interference.
- Takeoff Assistance
- Drift-free, stable take-offs on different surfaces are ensured with Takeoff Assistance.
- Intelligent Orientation Control (IOC)
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- In Course Lock mode, forward is the same as the nose direction recorded on takeoff.
- In-Home Lock mode forward is the direction from the multirotor’s current position back to home.
- Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, the direction is hugely simplified.
- Motor Failure Protection
- If a hex-rotor or octocopter equipped with a Naza-M V2 suffers a motor failure in flight in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. This allows it to fly safely back to home and land.
- Failsafe and Auto Go Home Support
- If the connection between the multirotor and the remote control is disconnected during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multirotor will fly back to its point of takeoff and land automatically. This feature can also be triggered manually using the One-Key Go-Home function activated using Assistant.
- Assistance for Smartphone
- Using a BTU with power-efficient Bluetooth, parameters can be adjusted at any time through a smartphone without excessive power use. Connection records are automatically stored by the Bluetooth module and protected by a password. Parameters can be automatically synchronized to the cloud and restored immediately when mobile devices are changed.
- All-In-One Compact Multi-Rotor Autopilot System
- New Assistant Software for Smartphones
- Supported Multi-rotors Quad-rotor: I4, X4
- Hex-rotor: I6, X6, IY6, Y6
- Octo-rotor I8, V8, X8
- Free Ground Station
- Take-Off Assistance
- Multiple Flight Control Modes and Intelligent Switching
- GPS Module Available for Accurate Position Stabilization
- Intelligent Orientation Control (IOC)
- Supports General, PPM, and S-Bus Receivers
- Arm/Disarm Modes for Safe Motor Starting
- 2-Axis Gimbal Stabilization
- Two Levels of Low Voltage Warnings and Protection
- Single Motor Failure Protection
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Supports Remote Gain Adjustment from the Transmitter
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems
- Assistant Software Windows: 8, 7, XP SP3
- OS X: 10.6 or later
- Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
- Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
- Horizontal: ±8.2′ / ±2.5 m
- Max Angular Speed 200°/s
- Max Tilt Angle 35°
- Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
- Descent: 14.8 ft/s / 4.5 m/s
|
Product |
Target Customer |
Hardware |
Software |
Function Extension Ability |
Major Components |
|---|---|---|---|---|---|
| NAZA-M Lite | AP/RC entry level | Based on NAZA V1 platform; no extension ability | NAZA lite Independent assistant software and firmware; | 1.GPS (Optional) 2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD) | MC GPS（optional） BEC/LED（Will have independent BEC and LED in the future） |
| NAZA-M V1 | AP/RC hobbyist | Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function; | Share the same NAZAM V2 assistant software and firmware; | 1.GPS (Optional) 2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS（optional） BEC/LED |
| NAZA-M V2+GPS Combo | AP/RC hobbyist | Optimized hardware structure; Independent PMU module with amazing function extension ability; Independent LED module; | Amazing function extension：such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station | MC GPS NAZAPMU V2 LED |
- 1 x Main Controller Unit.
- 8 x Servo cable.
- 1 x Power Management unit.
- 1 x Micro USB Cable.
- 1 x LED Module.
- 2 x Adhesive Tape.
- 1 x GPS Module.
Smart Lock Fingerprint Biometric Padlock | Keyless&Password-Free Access | Stores 20 Fingerprint | Waterproof Metal Lock for Home,Office Security
- CBK Smart Lock Fingerprint Biometric Padlock Package contains: 1 pis- Smart Lock , 1-Pis USB Charging Cable , CBK Smart Lock include And Does Not Require Any Type of Other Betery.
- Keyless Fingerprint Access: No Bluetooth, app, or key needed! Because your finger serves as the key, this fingerprint padlock is perfect for both young people and senior citizens. It can only be unlocked with registered fingerprints, saving you the trouble of misplaced keys or forgotten passwords. Note: For optimal security, set the administrator's fingerprint before using.
- Rechargeable and Fast Unlocking: With its cutting-edge fingerprint technology, it unlocks in 0.5 seconds! For easy entry, this smart lock may store up to ten fingerprints, including those of two administrators. Over 9,000 unlocks or 6–12 months of use are possible with a full one-hour recharge
- Versatile Uses: This fingerprint padlock is lightweight and portable, making it excellent for both indoor and outdoor applications. It may be used on gym lockers, suitcases, golf bags, handbags, school lockers, closets, bicycles, and more. Maintain the safety and accessibility of your possessions at all times and locations! Energy-Efficient Design: The low power consumption of this secure fingerprint padlock ensures that it runs well without rapidly depleting the battery. Perfect for regular use without the need for frequent charging.
- Battery-Saving Technology: This fingerprint padlock is a reliable option for home, business, and travel protection because it uses minimal energy while maintaining good performance
TDA-2050 5.1 AMPLIFIER WITH REMOTE, ENCODER & DISPLAY
2.0 & 4.0 Amplifier 2.0 Class AB Amplifier Board 2.0 Class D Amplifier Board 2.1 & 4.1 Class AB Amplifier Board Audio Pannel Usb Module & Bluetooth Subwoofer Amplifier
FEATURES & FUNCTIONS
1. FULLY REMOTE CONTROLLED WITH ROTTERY ENCODER
2. ALL FUNCTIONS WILL STORE TO LAST MEMORY
3. 5.1 (ALL 6CH) & 2.1 (ONLY FR & S.W) OPTION ON REMOTE
4. 1- SIX CHANNEL & 4-STEREO INPUTS
5. STEREO TO 5.1 DECODER IS INBUILT
6. BASS TREBLE ON FRONT CHANNELS (+\-14DB)
7. BASS TREBLE CAN BE DESABLE BY REMOTE
8. ALL CHANNELS GAIN (+\-14DB)
9. INBUILT USB 5V POWER SUPPLY
10. INBUILT SUBWOOFER FILTER
11. ANY MARKET USB KIT CAN BE CONTROLLED BY SAME REMOTE
12. HEAVY HEATSINK &GOOD QUALITY COMPONENTS
13. BOARD SIZE 9" X 5"
14. DISPLAY WELLCOME NAME CAN BE CHANGE AS PER CUSTOMER REQUEST
AMPLIFIERS AND POWER SUPPLIES
1. TOTAL SIX CHANNELS
2. SUBWOOFER HAVE TDA-2030 1-PAIR
3. OTHERS 5-CHANNELS HAVE SINGLE TDA-2030
4. SUBWOOFER 60-WATTS
5. FRONT,CENTER & SOURROUND CHANNELS 30-WATTS
6. POWER SUPPLY RECTIFICETION IS INBUILT
7. 12-0-12-AC 4-AMP
8. 0-12 AC 1-AMP
TDA3116 50w+50w Dual Channel DC 12V Audio Amplifier Board Pack of 1
Specification:-
- Amplifier Chip: TDA3116
- Output Power: 50W + 50W (dual-channel stereo)
- Operating Voltage: DC 12V
- Input Impedance: 20 kΩ (unbalanced)
- Signal-to-Noise Ratio (SNR): >100 dB
- Frequency Response: 20 Hz - 20 kHz
- Dimensions: Compact form factor for easy integration
Description
Efficient and Powerful TDA3116 50W+50W Dual Channel Amplifier Board for Clear Sound
The TDA3116 50W+50W Dual Channel Amplifier Board is an efficient and powerful audio solution designed to deliver clear and rich sound quality. Perfect for DIY audio projects, home audio systems, or portable speaker builds, this amplifier board operates on a DC 12V power supply and provides 50W per channel of output, ensuring high-performance audio with minimal distortion. Its compact design makes it easy to integrate into various audio setups.
Specifications:
- Power Output: 50W per channel (Stereo)
- Operating Voltage: DC 12V
- Channels: Dual Channel (Stereo)
- Audio IC: TDA3116
- Efficiency: High efficiency with low power consumption
- Signal-to-Noise Ratio: Excellent clarity and low distortion
- Dimensions: Compact size for easy integration into projects
- Applications: Ideal for home audio systems, DIY speakers, car audio, and more
